MR16 downlights are a type of light fitting that take an MR16 bulb and shine their light in a predominantly downward direction. The benefit of this type of light fitting is that they are designed to recess into your ceiling and sit flush with the ceiling. The result is a very subtle lighting system and increased ambience. If you find a range of numbers, say, for example, 30-50VA. The 30 is the minimum load rating, while the 50 is the maximum load rating. The total power consumption of your new bulb must be within this range. Brought to you by Mirrorstone Lighting, you can find a huge selection of GU10 downlights, fitted LED downlights and MR16 downlights amongst others. MR16 bulbs usually use 5-6watts of power, which is below the minimum load of a transformer so you would most likely have no problems. For those looking for some robust sturdiness from their downlight, we have a number of diecast items too, like our Fire Rated Downlight GU10 Tilt Satin Chrome Diecast.

Beam Angle: Standard Optics: 30.9°, Medium Filter: 40.4°, Medium Filter With Honeycomb: 33.6°, Wide Filter: 41.8°, Wide Filter With Honeycomb: 34.2°You might be worried if your recess depth is quite shallow on your ceiling – fear not however, as our selection of short can LED downlights are a suitable remedy for such a problem. In particular our Fire Rated Short Can Downlight GU10 Fixed Satin Chrome is a fine example of this. You may have also noticed the variety of finishes available to you – all our GU10 and MR16 Downlights come in white, satin chrome, chrome and brass options.

Field Angle: Standard Optics: 59.7°, Medium Filter: 81.7°, Medium Filter With Honeycomb: 63.9°, Wide Filter: 105.5°, Wide Filter With Honeycomb: 64.3° If it is a definite number, assume it is your maximum rating and don't install a bulb with higher consumption.

Stylish Bathroom Lighting

You needn’t look far if you’re after some LED Downlights – we’ve got everything you could want in our highly extensive range! You also have the option of fixed and tilt downlights. Our tilt option is particularly popular with customers as it allows them to angle their bulbs and control the position of the light creating feature lighting effects. Cutoff Angle: Standard Optics: 82.8°, Medium Filter: 148.9°, Medium Filter With Honeycomb: 84.7°, Wide Filter: 154.3°, Wide Filter With Honeycomb: 90° You may also need to know what type of bulb is required whilst additionally evaluating the brightness of the lighting.

More people are deciding to implement LED downlights in their homes. This is due to the fact that they are energy efficient. They conserve energy and can produce more light compared to halogen counterparts. Downlights generate a lot of heat during operation, making them hot after use. They are so hot that they can cause a first-degree burn. It is therefore advised to wait until the bulb is cool.MR16 LEDs operate on a lower voltage of 12 volts compared with the more popular mains, 230 volt GU10 LED cap type. This lower voltage requirement can either be 12V AC (Alternating Current) or 12V DC (Direct Current). If the voltage is AC, they are designed to work with existing low voltage halogen transformers. If they are DC you'll need an LED driver. Lumens: Standard Optics: 266, Medium Filter: 194, Medium Filter With Honeycomb: 98.3, Wide Filter: 182, Wide Filter With Honeycomb: 83.1 Afterwards, you need to use a screwdriver to loosen all the screws holding the fitting in place. Using the wires as a guide, locate the transformer (it is usually above the light fitting). You can also find it in your attic. Efficacy At Full: Standard Optics: 32 lm / W, Medium Filter: 23 lm / W, Medium Filter With Honeycomb: 12 lm / W, Wide Filter: 22 lm / W, Wide Filter With Honeycomb: 10 lm / W

You might need to disconnect and replace your transformer if there is a load mismatch. To disconnect, hold the wire in place and then unscrew the wires attaching the bulb fitting to the transformer. Within these different types of downlight, there are so many different products on offer that provide a different experience depending on what you’re looking for. Options For Every Need Iluminance: Standard Optics: 29 lux @ 5 m, Medium Filter: 11 lux @ 5 m, Medium Filter With Honeycomb: 9 lux @ 5 m, Wide Filter: 8 lux @ 5 m, Wide Filter With Honeycomb: 8 lux @ 5 m

A range of MR16 downlights, standard and fire rated, perfect for updating your old, tired lighting system. Compatible with our entire range of MR16 LED spotlights. Available in four finishes - white, chrome, satin and brass - and fixed and tilt options. Our fire rated MR16 downlights are rated for 90 minutes in the event of a fire and are suitable for all new build projects and extensions. What are MR16 downlights? The Philips range of MR16 LEDs we offer operate on AC meaning you can usually swap them straight over for your inefficient halogens. However...from experience this isn't always the case as the LED and transformer aren't always compatible. This can then involve having to upgrade the transformer. By the time you've swapped over the transformer, its easier and more cost effective to just replace your MR16 LEDs with mains voltage GU10s (with a GU10 lamp holder), or replace the entire downlights with new ones. You could go for a downlight geared towards safety with fire rated protection included – like our Fire Rated Downlight GU10 Fixed Chrome– which helps prevent the spread of fire between floors. Regarding the brightness, the intensity of the light can have a strong impact on the ambience of your room(s). You should select the most appropriate brightness when aiming for a particular vibe. LED lights are usually rated in lumens, which differ a little from regular bulb lights rated in watts. The higher the lumen output, the brighter the space. However, it is quite easy to convert watts to lumen.