Joined in 2023 
82 
63 About this deal
Before beginning the installation process, you should always read the installation guide. This is your first port of call and should be reviewed for each install. Flush the inlet pipework and fully fill the pump with water by opening all the water outlets before electrically switching the pump on. It is critical to discharge water through all the outlets, using natural flow before switching the pump on electrically. This will ensure that the air has been discharged from the connecting pipe work and pump chamber. 7. Plug the pump in You can always count on the HomeBoost pump to deliver exceptional performance and efficiency because it intelligently boosts flow only when necessary. Here’s why it stands out: Selecting the right bar pump for you involves considering the size of your shower head and how many outlets you want to pump to. View our shower pump selector guide below for further information. Shower pump selector guide:
The HomeBoost pump from Salamander is an intelligent inline pump that improves water performance to the entire house. It’s fitted directly onto the incoming mains water line in mains-fed systems. This pump is WRAS-approved, awarded the Quiet Mark, and comes with a 3-year warranty. This intelligent pump functions at 1.6 bar closed head; it will typically boost pressure by up to 1.5 bar while regulating flow up to 12 litres/min to ensure it complies with water fitting regulations. It recognises when pressure and flow are low and quietly boosts the performance of the incoming mains water, either directly or indirectly via the combination boiler, to 12 litres per minute. Make sure to turn off the mains water supply at the stop tap and drain down the system. 2. Cut the pipe There are three main types of hot water system in the United Kingdom – gravity fed, mains fed: combination boiler, and mains fed unvented cylinder.
File Downloads
In conclusion, the Salamander HomeBoost Inline Pump is a smart and reliable solution for low water pressure in your home. Its intelligent design detects and boosts flow only when needed, ensuring optimal performance and energy efficiency. Now, you can introduce the pump into its location and gently connect it to the pipework. 5. Turn the mains water on It’s important to note that the Water Supply and Fittings Regulations state that you can only pump the mains up to 12 litres a minute, so this pump is designed to switch off if your flow rate exceeds this and is therefore designed for circumstances where the mains water pressure is extremely low. There are still solutions available to households that need a higher flow rate than this, but they involve storing mains water, so take up significant space. Installing a Home Boost isn’t particularly difficult. With a few tools, and a bit of DIY know-how, you can install the Salamander Home Boost, without paying a plumbing or heating engineer. However, it is not compatible with gravity-fed systems. If you have a gravity-fed system, you may need to explore alternative options, like a whole-house pump.
You need to work out whether you want to pump to the shower only or additional appliances, for example bath taps, the toilet cistern or washing machine. The CT Xtra twin range will pump the shower only, all other ranges are suitable for multiple household appliances. View our shower pump selector guide below for further information. Do you want to boost hot AND cold water or hot OR cold water? Hot AND cold water The HomeBoost inline pump’s average lifespan depends on various factors, such as usage and maintenance. However, on average, these pumps can last several years and have a 3-year warranty, providing reliable and efficient water flow to your house. Are There Any Specific Maintenance Requirements for the Homeboost Pump? Choose a pumped model when mains water pressure and/or flow are low – or when you are not sure on your mains water pressure/flow. Choose unpumped only when flow is more than 9 l/min and pressure is 2.0 bar. CT Bathroom pumps have been designed specifically to meet the demand for increased water supply to the bathroom. With positive head and negative (universal) head models available in 1.8 or 2.6 There’s a good chance you’ve come across cheap copies of the Home Boost. At the end of the day, you get what you pay for. Salamander are leading pump brand, so provide a warranty to match.
With the HomeBoost inline pump, you can enjoy improved water flow and a more efficient water system in your home. Comparison With other Mains Pressure Boosters As part of The Water Supply (Water Fittings) Regulations (1999), incoming water supply can be pumped to achieve up to 12 litres per minute, hence that being the regulated maximum output of the Home Boost. If you’re looking for a quiet, efficient and powerful pump, delivering up to 12 litres per minute, the potential for an additional 1.5 bar of pressure and from a leading manufacturer, then the Salamander Home Boost is where we’d be heading. What’s Next? Link multiple vessels together to increase performance. Only one vessel should be a pumped model in this scenario.
Great Deal 
New Comment