Makita LS1018LN/2 240V 260mm Slide Compound Mitre Saw

Product Information

But at the decent price and low weight, the do-it-yourselfers can still reap great benefit without spending an arm and a leg. Miters 0° - 47° left and 0° - 60° right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° (left and right) This saw offers a lot of features for a lot of people. However, the manufacturer had professionals in mind when they designed it.

The Makita LS1018LN 240V 260mm Slide Compound Mitre Saw Laser will prove valuable to professionals such as carpenters and kitchen fitters. The powerful 240V motor has an input wattage of 1430W and a no load speed of 4300rpm to make short work of crosscuts and mitre cuts. This saw excels at cutting through wider materials and structures, such as boards and frames, thanks to its 260mm blade with a 30mm bore diameter. This particular saw can cut a 12″ wide board at 90°– so it’s great for shelving, wide dimensional lumber, plywood (see photo above), etc. Při koupi pokosové pily jsem chtěl stroj do 10-ti tisíc, který by uměl dělat přesné řezy na truhlařinu. Bohužel všechny stroje v této cenové relaci jsou spíše hrubější tesařské práce. Po shlédnutí některých pil přímo na prodejně jsem se rozhodl jít do této Makity. tím, že jsou stupnice lepeny, nejdou ani seřídit (kvalitní stroje mají stupnici na plechu a přišroubovanou, stavitelnou)As you can see, it’s a dual bevel saw. You can bevel left and right, both to 45°. While I would prefer a slightly extended bevel range, say to 47°, the 45° is industry standard and this will take care of 95% of most peoples beveling needs.

And while it doesn’t quite have the vertical board cutting capacity of the Dewalt DW717, it still has a decent fence and can handle most crown molding and baseboard jobs. Today I’ll be writing the Makita LS1018 review – This is a high quality, highly rated sliding compound miter, built with the professional user in mind. And to conclude my Makita LS1018 review I would add this: The saw literally has great features for just about any type of user.některé díly, které se zdají být solidními hliníkovými odlitky, jsou ve skutečnosti plastovými díly (stavitelné rozšíření stolu) This is a 13 amp direct drive motor, with a soft-start feature. This is good for prolonging the life of the saw, and it has another benefit I really like. With the soft start, you have virtually zero chance of board shift on startup. So you end up saving time, and headache, with this feature. Overall people find this saw very smooth, very accurate, and very much worth the money. This is why it has retained a high user rating in the online market for a long time. stavěcí šrouby úpinky jsou sice zašroubovány v hliníkovém dílu, ale po jeho obrobení, číňan nevyfoukal špony, šrouby namazal a namontoval. Vše drhnulo, musel jsem závitové spojení rozebrat, odmastit, vyčistit a opět namazat a složit