Silverline Tarmac Rake 1500mm (282371)

Product Information

Compact the soil using a plate compactor or roller, ensuring a firm and even surface for the sub-base layer. This step is crucial for preventing future settling or shifting of the driveway. A well-installed tarmac driveway offers numerous benefits, such as durability, cost-effectiveness, low maintenance requirements, and an attractive appearance. Using a wheelbarrow or a paver, transport the tarmac to the driveway and deposit it in a line along one edge.

Adding edging around the driveway to define the boundaries, prevent tarmac spreading, and enhance the overall appearance. Lay a thin layer of sand or fine crushed stone in the trench to create a level surface for the edging material. Excavate a shallow trench along the boundaries of the driveway, deep enough to accommodate the chosen edging material and provide a stable base.

Removing weeds

The power rake can be powered by gas or electricity, and it essentially does the job of the garden rake but with much less effort on your part. The motor powers rotating rake tines that can gather leaves and thatch. A power rake may use a bag or a hard container to gather the materials.

Ensure that the tarmac mixture is at the right temperature (usually between 250°F and 350°F) and consistency before application. Too cold or too hot tarmac can be challenging to work with and may result in a poor-quality finish. The lake rake will have either a very long handle or a shorter handle that is attached to a length of rope. It also has some kind of buoyancy aid attached to the top of the head so that you can extend the rake out as far as possible and rake up algae and floating debris from the top of a lake, pond, or other body of water.Spread a layer of crushed stone or aggregate (approximately 4-6 inches deep) over the leveled and compacted ground, ensuring even coverage across the entire driveway area. The bow rake looks very similar to the garden rake. The difference is in how the head attaches to the handle. The garden rake, also called the flat head rake, attaches directly to the handle using a single connection and forms a T shape or a flat head. A bow rake has arched supports that attach to either end of the rake and gives the head more stability, making it stronger and more beneficial for moving materials like gravel and mulch. To work out how much sub-base you need use this simple formula: Length of driveway x width x depth of sub-base or you can visit our type 1 mot calculator Laying and Compacting the Sub-base Material Crushed stone: Used for creating a stable sub-base, ensuring proper drainage and providing a strong foundation for the tarmac layer. Recommended materials for the sub-base include crushed stone or aggregates, such as Type 1 MOT (Ministry of Transport) or similar materials that offer good compaction and drainage properties. How do I work out how much sub-base I need?

Hay rakes are commonly used on small farms and are, as the name suggests, used to gather up hay and dried grass. They look similar to landscape rakes but have a wide head and large tines. Some are designed to be attached to and dragged by a tractor, making the job even easier. Applying finishing touches, such as sealing the tarmac and adding decorative elements, to protect and improve the driveway’s appearance. We recommend the Revolt Aluminium Spazzle which is ideal for levelling and manoeuvring tarmac and a variety of loose materials. Shovels: Essential for digging and removing any existing driveway material, as well as for spreading the crushed stone and tarmac. Tarmac, also known as asphalt, is a mixture of aggregate (sand, gravel, or crushed stone) and bitumen (a petroleum-based binder). The proportion of these materials can vary depending on the specific application and desired properties.

Removing pond weed

A garden rake’s rigid tines can be pressed into the ground to pull out weeds and other unwanted plants. Garden rakes can be used to disturb ground coverings, but their wide heads can also pull up plants which you want to keep if you are not careful. Secure the edging material in place using one of the following methods, depending on the material chosen: Snow and ice removal: During the winter months, promptly remove snow and ice from your driveway to prevent freezing and thawing cycles, which can cause damage to the tarmac surface. Use a plastic snow shovel to avoid damaging the surface and avoid using harsh de-icing chemicals that may harm the tarmac. Allow the tarmac to cool and harden before using the driveway. This process may take several hours to a day, depending on the weather and the specific tarmac mixture.

By installing edging around your tarmac driveway, you will enhance its appearance and ensure a stable and well-defined boundary, contributing to the overall success of your project. Laying the Tarmac Driveway Preparing and mixing the tarmac The sub-base serves as a stable foundation for the tarmac driveway, supporting the weight of vehicles and distributing it evenly.Proper drainage is crucial for the longevity of a tarmac driveway, as standing water can weaken the tarmac and cause damage over time.