Meffert's Puzzles Gear Ball

Product Information

Go through the “R2-U-R2-U” algorithm once. Rotate the right side of the ball upward 180 degrees (½ turn) twice (“R2”), then rotate the upper side to the left 180 degrees (½ turn) once (“U”). Then, repeat the process again—so it’s right-twice-up, right-twice-up or R2-U-R2-U. [8] X Research source Rotate the right side of the ball upward or downward 4 times. This is the very simple “R4” algorithm. Rotate the right side 180 degrees (½ turn) each time, upward if you have (“/”) and downward if you have (“\”). The gear ring will be in the proper alignment after you complete the fourth turn. [15] X Research source If you like using soft lures, and want a jig head that won't damage your lure bodies, then these jig heads are one of the best options out there. There are lots of different effects that can take place when you don’t strike the centre of the club, For instance, you may notice a regular pattern to your ball flight which will give you an indication whether you are hitting it on the toe or heel of the club. If you strike the ball out of the heel you will typically see that your ball flight will go pretty high, left to right but more noticeably your ball will not travel very far due to the high spin rate. On the other hand, when striking it out of the toe, your ball flight will generally turn right to left quite vigorously, you also might see that your ball runs out quite far on the fairway. This is due to the spin rate being lower than normal because the impact was of the toe of the golf club. So maybe when you are next out on the golf course and you have hit a dodgy tee shot just think about what your ball flight was like, then think about where you might have hit it on the clubface. Having a better understanding of where you hit it on the clubface will allow you to become a better ball striker. Forged from Japanese steel, these jig heads are exceptionally strong, with precision moulded functionality that will appeal to the dedicated predator angler.

In some cases, using R2-U-R2-U will not only put the interior pieces in the proper vicinity, but also place them in the correct face as well (for example, yellow into yellow). Find the other 2 “favorite color” corners and move them into place. Now that you’ve established 2 starting corners, (for example, the 2 red corners that are next to 2 yellow corners), look for the 2 other “favorite color” (red, for example) corners on the Gear Ball. They will always be separated from each other only by a side piece, and you’ll be able to rotate them together into place. Move them around until they are the other 2 corners in the same face as your starting 2 corners (for instance, all 4 corners in the face will be red). [3] X Research source Locate the 8 sets of interior pieces that need reoriented. At this point, there are only 2 scenarios: either all the interior pieces will already be in their proper faces (this is rare), or exactly 8 pairs of interior pieces will need to be flipped. Look over the ball to find the 8 pairs that need to be reoriented, then choose a pair to start with. [10] X Research source Remember that, whether you’re rotating up and down or side to side, the center section of the ball rotates half the amount of the side section. So, if you rotate the right side of the ball up and all the way around (360 degrees), the center section will rotate up and halfway around (180 degrees). For example, with the green face above the purple face, you might find that the bottom interior piece of the green face is purple, and the top interior piece of the purple face is green. This could be the first of your 8 mismatched pairs to fix.

Eventually, you'll be able to match the colors of the corners and centers in each of the other 4 faces. The turning is amazing. It’s easy to solve. It looks cool. It’s perfect, honestly. If you’re thinking about either getting this or the gear CUBE, get this one. Turning it takes zero effort at all. When solving it, only two algorithms are needed. If you want to see an actual review of this puzzle, I would suggest going on youtube and searching “RedKB Gear Ball.” Trust me. This is a representation of how twist face differs from other club faces on the market How you can put it into practice…

Line up the 4 correct pairs in the “standing slice” position. If 8 interior pairs are incorrectly oriented, that means 4 are correctly oriented. And, you’ll be able to turn the ball so that these 4 pairs create a “belt” that goes around the entire center section of the sphere. Position the ball so this “belt” is facing up, down, left, and right, but not directly towards you. [11] X Research source Available in a variety of sizes, all of which are great for soft lures, with a grip that holds well, without distorting the lure's shape. Find other sets of interiors to switch with R2-U-R2-U. For instance, you may find the same scenario you had with the yellow-blue-purple faces, this time by reorienting the ball so you have the red face above and the orange face below the blue face. Turn the ball up 90 degrees (¼ turn) so the orange face is towards you, then repeat the R2-U-R2-U algorithm to put the interior pieces in the proper vicinity. [9] X Research source Point an incorrectly-oriented gear ring towards you. For instance, the red half of the gear ring might be in the blue face, and the blue half in the red face. Hold the ball so that this mismatched gear ring is looking you straight in the eye. [13] X Research source For example, a heel strike will result in the club twisting closed and the ball will spin from left to right, opposed to this a toe strike is when the club will twist open and the ball will spin from right to left.Rotate any other misaligned gear rings into position with R4. Look over the ball to see if there are any gear rings still out of alignment. If so: [16] X Research source Spin the ball to get a feel for how it rotates. Because of the gear rings that span adjacent faces, you can spin the right or left thirds of the sphere either up or down, or the top or bottom thirds either left or right. When you do so, the center third will follow in the same direction but cover half the distance.