I absolutely love my new DIY Vintage Foam Stamps and the gold ink pad is definitely my favorite when it comes to how subtle and elegant the final images look. The foam stamps can be easily washed after using and can be used over and over again. And even if it was a time consuming process cutting all those small details, I would say the final results definitely make everything worthwhile. So I would do it again in a heart beat! I cut the negative space around the image itself in other smaller parts, so I can easily remove them after cutting. Rebecca using the wall sconce for a face stamp was really thinking! Love how it turned out! Thanks for sharing your ideas! You can free hand or use stencils to draw (using your embossing stylus ) more interesting designs on your cut images. By creating a craft foam stamp, you can stamp with both sides. This means you can have a reverse image! There are many fun techniques you can do with mirror or reverse stamping, but I went for a subtle, layered look.

Stamping Foam - Etsy UK Stamping Foam - Etsy UK

I drew on the foam with a pen and then cut it out using an x-acto knife. It's pretty easy to do so long as you have a steady hand. :DAs you can see I played a little bit with my embossing stylus and drew a few other lovely details here and there to add more interest to my stamps. I found that I like to use the dye ink and distress inks pads with my molded foam stamps. They wipe off the foam stamp easily. Some inks and paints will stain the foam. No worries… that is fine. They will still work and remold. I just like to keep my tools as clean as possible! WINK: You can see the stamp and ghost print created with the cross below. Heat the stamp foam with a heat gun and press against any textured surface. Stamp amazing textures into your projects and simply reheat foam to restore. Heat and use again for a new texture! Similar to 'Magic Stamps'. The colour of these stamps can vary. Simon Hurley create. Stamping Foam are moldable foam pieces that are great for creating original and unique stamps. To use, heat foam with Heat It Craft Tool. Then, press foam into textured surface and hold in place for 5-10 seconds. Ink with Simon Hurley create. Dye Ink Pads and stamp. The foam can be reheated and remolded to use over and over again. On the second row – I drew the eyes, the beak and all the other details of the cute owl; I enhanced the design on the lovely butterfly, following the original image design; I added really fine lines in the middle of my flower and really fine dots at the end of the lines.

How to make Foam Stamps! - The Graphics Fairy How to make Foam Stamps! - The Graphics Fairy

Love your work and have watched your video several times to make stamps with foam and dies. I have one question to ask before tying this, does the glue pen you use leave any residue on the misti? If so do you remove it? Do you think a 2-way glue pen might work if you leave it to dry so that is will be removable. The images I decided to use for this project are somehow universal so you can create a basic set of DIY Vintage Foam Stamps to have around. As always, feel free to further experiment and create other more specific stamps to perfectly fit your needs, The Graphics Fairy could be your hidden treasure when it comes to making the stamps that you like! To set your paint, let it dry to the touch and then iron it wrong side up using a dry iron for thirty seconds or so - no steam!Move on to the other images and try to trace their silhouette (their outside shape) but all the other details from the inside as well. You can try to capture everything as accurate as you can, but also try to keep in mind that the smaller the outside details, the harder it will be to cut them afterwards. So you can round some of the parts that are too narrow or adjust and connect some parts differently, following a more easier shape. Trace each image moving gradually from on side to the other and then downwards and try not to rest your hand on the images that you have already traced. If you are feeling adventurous, you can even add your personal touches to the images by completely changing some elements – for demonstrating purposes, I added a small heart inside of one of the keys and completely changed its appearance.

Foam Cutting - Custom Made Foam Inserts | MSA Foam Cutting - Custom Made Foam Inserts | MSA

It is as good as advertised. The possibilities are only limited by imagination. The service from AFTH was speedy and very good. I'll look to shop there again.

On the first row – I drew a small dot to make an eye on my bird silhouette stamp; I drew fine lines to enhance the dragonfly’s wings; I defined each of the petals of the flower. Step 1 – Heat foam with Heat Tool: Place the foam flat on your table. Hold a heat tool about an inch from the surface and move it over the foam for about 15-20 seconds. TIP: Keep the heat gun moving the entire time.

Stamping Foam,2 Size Reusable Moldable Foam Blocks for 6PCS Stamping Foam,2 Size Reusable Moldable Foam Blocks for

These are just a few of the many ways you can so use craft foam stamps. I hope you give it a try! HERO ARTS KIT Carefully lift the tracing paper after rubbing all the images, hopefully all your foam transfers will be looking good and sharp! 🙂 And here are the vintage key stamps in action, I first tried them on some vintage paper with a mini gold ink pad I had around. I was over the moon! 🙂 About: Hi! I'm a slightly feral mountain hermit that likes to be helpful. I do community management at Instructables & Tinkercad. 🙌 Want to hear me chat about making? Search "CLAMP Podcast" on YouTube or your favorit…So remember, you’ll need to use the X-acto knife to cut the outside shape of the image and the embossing stylus to draw all the other details from the inside of the image. For the last stamps – I drew the eyes and added a rounded line on the wings of my birds on the branch image; I enhanced the shape of the cupid stamp by drawing the silhouette a few times; I added details on the wings and on the body of the bee: for the heart I added the top design using a stencil, like I already showed you and drew two small branches with leaves. For my first card with this technique, I used green inks and added images from the oh-so-fun Hero Arts Hello Toucan Stamp Set ( SSS | HA).