Energizer 3LR12 4.5 V Max Battery

Product Information

LiFePO4 properties: long lasting (2000+ cycles), safer, more stable, good continuous/peak discharge rates (3C/10C), less energy dense. This dry cell is commonly used in the UK for remote level crossing telephone handsets, where solar cells and rechargeable batteries have not been specified or retrofitted. By January 2017, was being produced at Tesla Gigafactory 1 for the Tesla Model 3, [216] reaching an annual production rate of 1.

The increased dimensions may mean the cell will no longer fit in battery compartments intended for cells without such circuitry. Please complete the purchase (or remove the quote – don't worry it's still available in My Account) before adding these additional items.

These cylindrical cells are widely used in EVs including electric bikes, electric scooters, electric cars / hybrid electric cars, UPS batteries, storage batteries for solar power systems, starter batteries for cars and motorbikes etc. This non-standard size battery is designed for reliability in specialist applications such as lighting. This M1203 will directly replace batteries with the following codes: 3LR12, MN1203, 1203, 1289, AD28, 3R25, AD28VP, 1289, 3R12G, 3R12R, H1176.

The full battery designation identifies not only the size, shape and terminal layout of the battery but also the chemistry (and therefore the voltage per cell) and the number of cells in the battery. Because four cells in series produces a voltage range similar to 6 cells of Lead-acids and their fire-resistant properties, they can be used to replace a 12V lead acid car battery. A rare battery, sometimes used in car security (car alarm/keyfob batteries), organizer (backup battery for PDA such as Psion etc.The complete nomenclature for a battery specifies size, chemistry, terminal arrangement, and special characteristics. In Switzerland as of 2008 [update], these batteries accounted for 16% of lithium camera battery sales. In the following table, sizes are shown for the silver-oxide IEC number; types and capacity are identified as "(L)" for alkaline, "(M)" for mercury (no longer manufactured), and "(S)" for silver-oxide.

Since LiMnO 2 cells produce 3 volts there are no widely available alternative chemistries for a lithium coin battery. a b c "HDS Systems: Frequently Asked Questions – Answers to questions about our flashlights and technologies". The amount of power generated is dependant on the capacity of the cells, with a wide range of types and sizes available to fit a variety of devices. The first two digits are the nominal diameter of the cell in millimetres, and the two following digits are generally the height in millimeters, with the fifth digit indicating cylindrical shape.Can be replaced with an AA cell using a plastic sabot (size adaptor), with proportional loss of capacity. Typical 20th century uses for this high capacity dry cell named for its 6-inch height include school science experiments, and starting glow plug model engines and in antique equipment. A sealing tab keeps air out of the cell in storage; a few weeks after breaking the seal the electrolyte will dry out and the battery becomes unusable, regardless of use.

It was used in some early transistor radio amplifiers with a Class B output stage, allowing the loud speaker to be connected between the amplifier output and the battery center tap. In Switzerland as of 2008 [update], these batteries accounted for 6% of lithium camera battery sales. Used in locations susceptible to high vibration/shock where connectors may be knocked off the terminals. This size is sometimes used in devices that can take either one 26650 or three AAA cells in series in a cylindrical 3-cell battery carrier.Often used in pairs instead of CR2032 for devices that require more than 3V, like blue/white LED flashlights. Used in small RF devices such as key fob-style garage door openers, wireless doorbells, and keyless entry systems where only infrequent pulse current is used.